Click Here

 

Are you currently searching for advise about How to Troubleshoot and Repair an Electric Water Heater?

Lots of modern houses take advantage of an electric water heater for their furnace, because of its convenience as well as simplicity of use. However, similar to any other electric home appliances, troubles might occur with its use, unexpectedly. It can be really frustrating to get up to a cold shower as opposed to a warm one or having your bath with water that isn't hot sufficient or perhaps as well warm. Whatever the case might be, water heater problems can be fairly stressful. Luckily, we've made a checklist of feasible services to your water heater concerns. There are a number of elements that could cause a number of these troubles, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for security. Whatever the trouble is, getting it repaired ought to not position excessive of a problem if you comply with these steps:

 

Examine Your Power Supply:

As standard as this may appear, it is really required. Without appropriate power, your water heater will not work. So the first thing to do when your water suddenly stops working is to confirm that it isn't a power issue. Check if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the issue, simply turn it on and off once again. Change any damaged or damaged fuse. Test the device with power after these changes to see if it's now working.

 

Inspect the Heating Element in the Water Heater:

If it's not a power problem, then try taking a look at your heating element if it is still working. Examine each of your heating elements to make sure the issue isn't with any of them. If any one of them is damaged, replace that part and then check whether the hot water is back on.

 

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you may require to examine the temperature settings on your top thermostat. Guarantee the breaker is turned off prior to doing anything. Open up the access panel as well as press the red button for temperature level reset above the thermostat. This should help heat the water. Transform the breaker back on as well as inspect if the issue has actually been fixed.

 

Call An Expert:

If after changing all malfunctioning parts and resetting your temperature level, the water heater still isn't functioning, you may require to speak to a professional plumber for an expert point of view. The trouble with your heater could be that the cold and hot faucets have been switched or it might be undersized for the amount of warm water needed in your home. Whatever the case might be, a professional plumber would certainly help solve the problem.

 

Verdict

Water heater troubles are not always significant. Most of them are due to minor concerns like a blown fuse or worn-out heating element. Changing the malfunctioning components must do the trick. Nevertheless, if you are still unable to address the issue, give a call to your closest plumber to come to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you liked our section on What Would Cause My Electric Water Heater to Stop Working?. Thanks a lot for taking a few minutes to read through our post. Sharing is caring. You won't know, you may be helping someone out. Many thanks for taking the time to read it.

24/7 service, call!